Spooky-Friendly Lithophane Ghost Display / LED Backlit Accent Piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tabletop LED lithophane ghost display! Translucent dual-glow face, hollow LED cavity & cord pass-through base.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bring a soft, magical Halloween glow to your desk, mantel, or shelf with this tabletop LED Spooky-Friendly Ghost Display! Evolving from the original wall accent silhouette, this tabletop edition features a Lithophane Dual-Glow Face with an ultra-thin 0.0314″ (0.8mm) shell. When illuminated, bright light beams directly through the eye and mouth cutouts while casting a gentle, translucent glow across the entire body of the ghost!
Originally conceptualized as a custom woodworking design, this model has been fully adapted for 3D printing with precise mounting tolerances, clean wire routing, and versatile lighting options. Print it as a standalone tabletop decor piece or use it as a physical template guide for scroll saw or router woodworking!
Be sure to explore the rest of my lighting collection here: Illuminated Silhouette Collection
Key Features:
Lithophane Dual-Glow Effect: The ultra-thin 0.0314″ (0.8mm) front shell lets bright light pass through open facial cutouts while scattering a soft, ambient illumination across the body of the ghost.
Precision Fit & Wire Management: The 6″ base features built-in alignment insets and tabs to securely slot the ghost upright, along with two convenient slotted pass-through holes (one positioned beneath each leg so you can use whichever side works best to route your power cord cleanly out the back).
Versatile LED Backlighting Cavity: Designed with a hollowed-out rear cavity for easily mounting LED light strips behind the faceplate.
Optional Rear Light Shield: Includes an optional backplate that fastens with standard hardware using pre-modeled mounting holes to direct light forward and hide internal wiring.
Woodworker Friendly: Can double as a physical template guide if you prefer cutting real wood.
Dimensions
Base: 6” X 3” (rounded ends) X 0.375”
Height: 9.5”
Total Height: 9.875”
Width: 8” at bottom of rack
Thickness: 0.75”
Print Settings
Material: PLA (recommended for optimal lithophane translucency)
Layer Height: 0.12mm to 0.20mm (0.12mm recommended for fine face details)
Infill: 20% or higher (Gyroid or Grid).
Orientation: Print flat on its back face down; rotate diagonally across the print bed to fit standard 220x220mm build volumes.
Supports: Requires for alignment tabs on the ghost.
Looking for the wall-mounted version instead or other variations?
Check out my companion listing here: