1 / 3
Diaper Genie Hold down/Stay
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small bracket to keep your Diaper Genie from slipping and sliding all over your floors.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After moving the diaper genie from a carpeted room to a smooth floored room, it was obvious it wasn't going to stay in place. Everytime you flick the pedal (and ten more times for good measure) it works it's way farther away from you.
So I made this little bracket to keep it in place, it fits underneath the dresser beside it. You'll have to adapt it to wherever you'd like to secure it. But the profile for the diaper genie to slip into will really be all you need to make that work.