InnoMaker USB Camera Case & Tilting Desk Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case + tilting desk stand for the InnoMaker 1080P USB camera (32 mm PCB). Aim and lock with two knobs. No supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
A compact case and tilting desk stand for the InnoMaker 1080P USB2.0 UVC camera (130° wide angle, 32 x 32 mm PCB, M12 lens). The camera board sits in a small housing with a front bezel and a vented rear cover. The housing tilts in a U-yoke with two knurled knobs, so you can aim the camera and lock it in place. A clip on top holds the USB cable.
Parts (12, all on one plate in the 3MF; also included as separate STLs):
01 Front Bezel, 02 Main Housing, 03 Rear Cover
04 Cable Strap
05 U-Yoke, 06 Desktop Base
07 / 08 Pivot Knobs, 09 / 10 Pivot Washers
11 / 12 Printed Pivot Bolts
Hardware: M3 x 12 mm and M3 x 16 mm screws.
Print notes:
Tested on Bambu Lab A1, 0.4 mm nozzle, PLA
0.2 mm layers, no supports, 2 walls, 15% infill
Any color works. Mine is a black case on a blue stand.
Assembled and tested with the camera.
How it was made: designed by me; AI helped with the parametric code.
Commercial use: this model is for personal use only (CC BY-NC). If you'd like to sell prints, please send me a message to discuss a commercial license.
Not affiliated with InnoMaker. This is a fan-made accessory.
☕ Enjoying this model? You can support my work with a coffee: https://buymeacoffee.com/mumakes