1 / 2
Cinestill CS-Lite Essential Film Holder Baseplate — zdjęcie 1
1 / 2

Cinestill CS-Lite Essential Film Holder Baseplate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder to locate your essential film holder firmly on top of a Cinestill CS-Lite

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Recently picked up an Essential Film Holder v3.1 and the size is good but does not fit all that well directly on top of a Cinestill CS-Lite, narrowband version.
I modelled up a quick and dirty baseplate so the Essential Film Holder will sit firmly and solidly on top of the CS-lite without potentially moving off of the scanning light. The feet on the EFH sit on the inside edge of the light's frame and can move out of position and mess up the film plane.

Now it will stay firmly in place, located just where it needs to be.

Printed in ABS, was a little snug, suggested to increase the scale to 100.5 - 100.8% to accommodate for ABS shrinkage if printing in ABS. The CS lite gets pretty warm so printing in PLA is not advised.

Tagi