Gridfinity - Daka
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable DAKA GRID-Style Gridfinity Insert for rifle cases
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted the DAKA GRID setup in my Pelican V730 without the $140 price tag (and I wanted my Gridfinity bins to work in it too), so I built a printable version. Then friends started asking about their cases, so now it covers 13 of them.
How it works
It's the same idea as the original. There's a grid base, you plug in blocks wherever your gear needs bracing, and the case's own lid foam presses everything down so nothing moves. The difference is that the base is standard Gridfinity, so any Gridfinity bin you already have just works.
Gridfinity frame tiles sit on a thin foam bed in the bottom of the case
TPU bumpers lock the grid against the case walls so it can't slide
Squishy TPU blocks (1x1, 1x2, 1x3) brace your rifles anywhere on the grid
Four tall lid posts reach up into the lid foam and clamp the whole layout
Low pads give your gear a soft spot to rest on instead of the frame ridges
Rearranging takes seconds and there's no foam to cut
Supported cases
Pelican Vault: V700, V730, V770, V800
Pelican Protector: 1700, 1720, 1750 (also fits Eylar 38/44/53 and Harbor Freight Apache 9800)
Plano All Weather 2: 36, 42 and 52 in (and the Rustrictor versions)
Magpul DAKA Hard Case: C35, R44, LR53
Each case has its own folder with a layout picture, a print list, and the same number of blocks as the original kit for that case.
Pelican Vault V700 Takedown (pelicanV700/)
Material | Core kit | Add-ons | Full set | Buy |
|---|---|---|---|---|
PETG | 590 g: 10 tiles, 4 lid posts | 180 g: 2 bins | 770 g | 1 x 1 kg spool |
TPU 95A | 1,020 g: 16 blocks, 5 pads, 14 bumpers | 460 g: 10 V and angled blocks | 1,480 g | 2 x 1 kg spools |
Foam bed | 36.4 x 14.4 in, 0.65 in thick | reuse the case’s bottom foam layer or a 5/8 in closed-cell sheet |
Pelican Vault V730 Tactical Rifle (pelicanV730/)
Material | Core kit | Add-ons | Full set | Buy |
|---|---|---|---|---|
PETG | 700 g: 12 tiles, 4 lid posts | 190 g: 2 bins | 890 g | 1 x 1 kg spool |
TPU 95A | 1,290 g: 20 blocks, 8 pads, 16 bumpers | 460 g: 10 V and angled blocks | 1,750 g | 2 x 1 kg spools |
Foam bed | 43.9 x 15.9 in, 0.65 in thick | reuse the case’s bottom foam layer or a 5/8 in closed-cell sheet |
Pelican Vault V770 Single Rifle (pelicanV770/)
Material | Core kit | Add-ons | Full set | Buy |
|---|---|---|---|---|
PETG | 550 g: 6 tiles, 4 lid posts | 180 g: 2 bins | 730 g | 1 x 1 kg spool |
TPU 95A | 1,090 g: 16 blocks, 5 pads, 14 bumpers | 460 g: 10 V and angled blocks | 1,550 g | 2 x 1 kg spools |
Foam bed | 49.9 x 9.9 in, 0.65 in thick | reuse the case’s bottom foam layer or a 5/8 in closed-cell sheet |
Pelican Vault V800 Double Rifle (pelicanV800/)
Material | Core kit | Add-ons | Full set | Buy |
|---|---|---|---|---|
PETG | 750 g: 14 tiles, 4 lid posts | 180 g: 2 bins | 930 g | 2 x 1 kg spools |
TPU 95A | 1,560 g: 24 blocks, 8 pads, 18 bumpers | 460 g: 10 V and angled blocks | 2,020 g | 3 x 1 kg spools |
Foam bed | 52.9 x 15.9 in, 0.65 in thick | reuse the case’s bottom foam layer or a 5/8 in closed-cell sheet |
Pelican 1700 Protector Long Case (pelican1700/)
Material | Core kit | Add-ons | Full set | Buy |
|---|---|---|---|---|
PETG | 490 g: 10 tiles, 4 lid posts | 160 g: 2 bins | 650 g | 1 x 1 kg spool |
TPU 95A | 1,050 g: 16 blocks, 5 pads, 14 bumpers | 460 g: 10 V and angled blocks | 1,510 g | 2 x 1 kg spools |
Foam bed | 35.6 x 13.4 in, 0.50 in thick | reuse the case’s bottom foam layer or a 1/2 in closed-cell sheet |
Pelican 1720 Protector Long Case (pelican1720/)
Material | Core kit | Add-ons | Full set | Buy |
|---|---|---|---|---|
PETG | 540 g: 10 tiles, 4 lid posts | 160 g: 2 bins | 690 g | 1 x 1 kg spool |
TPU 95A | 1,110 g: 16 blocks, 8 pads, 14 bumpers | 460 g: 10 V and angled blocks | 1,570 g | 2 x 1 kg spools |
Foam bed | 41.9 x 13.4 in, 0.50 in thick | reuse the case’s bottom foam layer or a 1/2 in closed-cell sheet |
Pelican 1750 Protector Long Case (pelican1750/)
Material | Core kit | Add-ons | Full set | Buy |
|---|---|---|---|---|
PETG | 590 g: 12 tiles, 4 lid posts | 160 g: 2 bins | 750 g | 1 x 1 kg spool |
TPU 95A | 1,370 g: 20 blocks, 8 pads, 16 bumpers | 460 g: 10 V and angled blocks | 1,830 g | 3 x 1 kg spools |
Foam bed | 50.4 x 13.4 in, 0.50 in thick | reuse the case’s bottom foam layer or a 1/2 in closed-cell sheet |
Plano All Weather 2 36 in (planoAw2x36/)
Material | Core kit | Add-ons | Full set | Buy |
|---|---|---|---|---|
PETG | 570 g: 10 tiles, 4 lid posts | 170 g: 2 bins | 740 g | 1 x 1 kg spool |
TPU 95A | 980 g: 16 blocks, 5 pads, 14 bumpers | 460 g: 10 V and angled blocks | 1,440 g | 2 x 1 kg spools |
Foam bed | 36.5 x 13.7 in, 0.50 in thick | reuse the case’s bottom foam layer or a 1/2 in closed-cell sheet |
Plano All Weather 2 42 in (planoAw2x42/)
Material | Core kit | Add-ons | Full set | Buy |
|---|---|---|---|---|
PETG | 570 g: 10 tiles, 4 lid posts | 160 g: 2 bins | 730 g | 1 x 1 kg spool |
TPU 95A | 1,040 g: 16 blocks, 8 pads, 14 bumpers | 460 g: 10 V and angled blocks | 1,500 g | 2 x 1 kg spools |
Foam bed | 42.9 x 13.9 in, 0.50 in thick | reuse the case’s bottom foam layer or a 1/2 in closed-cell sheet |
Plano All Weather 2 52 in (planoAw2x52/)
Material | Core kit | Add-ons | Full set | Buy |
|---|---|---|---|---|
PETG | 630 g: 12 tiles, 4 lid posts | 160 g: 2 bins | 790 g | 1 x 1 kg spool |
TPU 95A | 1,300 g: 20 blocks, 8 pads, 16 bumpers | 460 g: 10 V and angled blocks | 1,760 g | 2 x 1 kg spools |
Foam bed | 51.9 x 13.9 in, 0.50 in thick | reuse the case’s bottom foam layer or a 1/2 in closed-cell sheet |
Magpul DAKA Hard Case C35 (dakaC35/)
Material | Core kit | Add-ons | Full set | Buy |
|---|---|---|---|---|
PETG | 600 g: 10 tiles, 4 lid posts | 170 g: 2 bins | 770 g | 1 x 1 kg spool |
TPU 95A | 1,300 g: 20 blocks, 8 pads, 14 bumpers | 460 g: 10 V and angled blocks | 1,760 g | 2 x 1 kg spools |
Foam bed | 35.2 x 16.5 in, 0.50 in thick | reuse the case’s bottom foam layer or a 1/2 in closed-cell sheet |
Magpul DAKA Hard Case R44 (dakaR44/)
Material | Core kit | Add-ons | Full set | Buy |
|---|---|---|---|---|
PETG | 660 g: 12 tiles, 4 lid posts | 170 g: 2 bins | 840 g | 1 x 1 kg spool |
TPU 95A | 1,350 g: 20 blocks, 8 pads, 16 bumpers | 460 g: 10 V and angled blocks | 1,810 g | 2 x 1 kg spools |
Foam bed | 44.2 x 16.5 in, 0.50 in thick | reuse the case’s bottom foam layer or a 1/2 in closed-cell sheet |
Magpul DAKA Hard Case LR53 (dakaLR53/)
Material | Core kit | Add-ons | Full set | Buy |
|---|---|---|---|---|
PETG | 740 g: 14 tiles, 4 lid posts | 170 g: 2 bins | 920 g | 2 x 1 kg spools |
TPU 95A | 1,600 g: 24 blocks, 8 pads, 18 bumpers | 460 g: 10 V and angled blocks | 2,060 g | 3 x 1 kg spools |
Foam bed | 53.7 x 16.5 in, 0.50 in thick | reuse the case’s bottom foam layer or a 1/2 in closed-cell sheet |
Optional extras
V-blocks with a channel for barrels
Angled blocks (45/90, 30/60 left and right, and a 45 degree diagonal)
Lid-height bins in 2x2 and 2x4
Print settings
Tiles, lid posts and bins: PETG, 0.2 mm layers, 3 walls
Blocks, pads and bumpers: TPU 95A, 2 walls, 10 to 20% gyroid (they come out squishy, like the foam)
No supports needed, and every part is already oriented
The largest part is 210 mm, so it fits a 256 mm bed
A full kit takes about 2 to 2.5 kg of filament, depending on the case
No TPU? Print the blocks and pads in PETG and stick 2 mm EVA foam on the faces that touch your gear
Test fit first
Case makers publish interior sizes measured at the rim, and the walls taper toward the floor. Some of these cases don’t publish every dimension, either. The V730 and V800 are built from complete published specs. The rest are close, but worth a quick check before you spend a couple of kilos of filament:
Print one tile, one double block and one corner bumper
Pull the thick base foam, keeping a thin bottom layer (or lay in a 1/2 in closed-cell sheet)
Drop the parts in and close the lid
If the bumpers are off, the included Python generator rebuilds them from your measurements in a few seconds.
Setting it up
Keep the lid foam in. It does half the work.
Lay the tiles out like the layout picture, then fit the bumpers around the edge. The corner and tapered bumpers all print the same, and you flip half of them upside down when you install them.
Put pads under your gear and blocks around it: two columns of blocks per side, or three for anything over 7 lb
Let optics float, so they’re not resting on blocks or walls
Point lights and lasers up into the lid foam
The first close is stiff on purpose. Leave the case closed and empty for a day and the foam will settle.
Got a different case?
The Python generator is in the source folder. Give it your case's inside length, width and depth, and it builds the whole kit, including the grid, bumpers and post heights.
Credits
Built on Gridfinity by Zack Freedman and inspired by Magpul's DAKA GRID Organizer. Not affiliated with or endorsed by Magpul, Pelican or Plano. Brand names are only here to tell you which case each kit fits.
Additional resources
Ammo that rides in this grid: my Primer-Up Ammo Racks drop into 4x2 Gridfinity trays with the lid on, and the mag loaders ride in 3x1 and 4x1 caddies.