BIQU B1 UM2 Nozzle Box (Print in place and parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a nozzle box for my UM2 style nozzles, which fit the Biqu B1, but the ones available (at least that I found)…
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 153
- Wydruki
- 4
- Wyświetlenia
- 1020
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a nozzle box for my UM2 style nozzles, which fit the Biqu B1, but the ones available (at least that I found) were quite large.
I remixed gportelli's hinged print in place parametric box to hold 10 nozzles. The box prints in place, as the name suggests, and then there is an insert to go inside and hold the nozzles.
I am not that adept at fusion 360, but did attach the f3d files so that you can scale the box using the parameters section if you want. The insert is a component, so it will scale with the box as well.
****You'll notice that the text is upside down on my photos, I have corrected that in the STL file so that it will print the right way around :)
Once printed, support the hinge and gently rock it back and forth to break it free. If it welds together, I'm sorry to say it, but your printer needs tuning :)
Print Settings
Printer:
BIQU B1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
Doesnt matter
Filament:
Funkiments PLA
Pastel Blue
Category: 3D Printing