Gyroscopic cup holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cup holder that has a gyroscopic ring to make sure your drink does not spill
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a gyroscopic cup holder that makes sure that your drink does not spill in the car, stroller. bus, bike, or any other place you need a cupholder. I made this because I needed a cupholder for my swing and wanted a way to make sure that the drink would not spill as it was moving. I built this model by starting by experimenting with different attachment modes for the main piece. I finally settled on a basic, tapered, cone-style base. I then made the actual cupholder. After that, I started on the gyroscopic rings. To do this, I made the outer ring and its snap connector. I then made the inner ring. To finish, I made the cutouts for the main body and the cupholder.
Assembly
To begin, take the cupholder, outerring, and connecters to the side
Then push the connecters through the holes on the cupholders and snap the outerring into the spheres
Next, attach the inner ring to the inner one by snapping in the spheres of the innerring to the holes of the outer one
To finish, slide the cupholder into the main base
You are now finished