1 / 5
Arduino+NXP Developemot Board Holder — zdjęcie 1
1 / 5

Arduino+NXP Developemot Board Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Can be stackable to hold as may boards and bread boards as you want!

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
4
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

This model is used to store both Arduino's NXP Dev board's Raspberry Pi's. The model can be printed multiple times and stacked upon one another to make the tower bigger than the one shown in the pictures. The model is 100mm 100 mm*73.5mm with the pegs. Without pegs the model is 100mm*100mm*70mm. 

ASSEMBLY INSTRUCTIONS!!!!!

Please align all the holes first, and sand the pins that are sticking out since the tolerance on this build is 0.3mm so for ease of installing SAND THE PINS!!!

Tagi