Flexi Rat Keychain 鼠 | Chinese Zodiac | Print in Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wiggly print-in-place rat keychain: the Rat leads the Chinese zodiac, and its tail swishes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
The Rat (鼠) comes first in the Chinese zodiac, and it's the third of our twelve zodiac flexi keychains to go live.
It prints in one go: no supports, no assembly, no glue. Six parts, five joints, a long beaded tail that swishes, round ears and whiskers, the character 鼠 on its back, and the key-ring loop on its nose.
Size: 111 x 37 x 6 mm.
Test-printed on our Creality SPARKX i7: that's the print in every photo and video. A ready-made Creality Print project for the i7 is included next to the STL, plus an Anycubic Kobra X project set up the same way (not test-printed on the Kobra X yet).
Print settings:
PLA or PETG, 0.4 mm nozzle, 0.2 mm layers
No supports, no brim
Keep elephant-foot compensation on (about 0.1-0.15 mm) so the joints don't fuse to each other
After printing, flex each joint gently once to free it
Which material: PLA is fine for a keychain that mostly stays indoors. If it lives in your pocket or rides in a hot car, use PETG (PLA starts to soften around 55-60 °C).
Eight more animals are on their way. Follow Two Paws Workshop so you don't miss them.
Designed by us with AI help (the shapes are written as OpenSCAD code), then printed and tested for real: every photo and video here is the actual print.
Two Paws Workshop: two of us at the bench, making things that move.
Watch all twelve wiggle together on our YouTube Short: https://youtube.com/shorts/ZrqWbXjezEU