1 / 4
Flexi Snake Keychain 蛇 | Chinese Zodiac | Print in Place — zdjęcie 1
1 / 4

Flexi Snake Keychain 蛇 | Chinese Zodiac | Print in Place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wiggly print-in-place snake keychain that slithers in an S at the flick of a wrist.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
1
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Here's the Snake (蛇), the fourth of our twelve Chinese zodiac flexi keychains and the wiggliest one yet.

It prints in one go: no supports, no assembly, no glue. Seven parts, six joints, a scaly body that slithers in an S at the flick of a wrist, a diamond head with a forked tongue, the character 蛇 on its head, and the key-ring loop at the snout.

Size: 128 x 27 x 6 mm.

Test-printed on our Creality SPARKX i7: that's the print in every photo and video. A ready-made Creality Print project for the i7 is included next to the STL, plus an Anycubic Kobra X project set up the same way (not test-printed on the Kobra X yet).

Print settings:

  • PLA or PETG, 0.4 mm nozzle, 0.2 mm layers

  • No supports, no brim

  • Keep elephant-foot compensation on (about 0.1-0.15 mm) so the joints don't fuse to each other

  • After printing, flex each joint gently once to free it

Which material: PLA is fine for a keychain that mostly stays indoors. If it lives in your pocket or rides in a hot car, use PETG (PLA starts to soften around 55-60 °C).

Eight more animals are on their way. Follow Two Paws Workshop so you don't miss them.

Designed by us with AI help (the shapes are written as OpenSCAD code), then printed and tested for real: every photo and video here is the actual print.

Two Paws Workshop: two of us at the bench, making things that move.

Watch all twelve wiggle together on our YouTube Short: https://youtube.com/shorts/ZrqWbXjezEU

Tagi