1 / 5
3.5"/2.5" Storage Drive Stacking Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick-printing and tidy way to store all of those 2.5" and 3.5" HDDs/SSDs we'll get around to using "someday"
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 405
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (31)Powiązane
Compatible with both 2.5" and 3.5" hard drives and SATA SSDs. Print settings don't really matter, just make sure to use enough top/bottom layers. You can print two mirror racks like in the third picture by mirroring the rack in the slicer, or you can just print two identical ones like with the orange example. You can also stick rubber feet on the bottom wedges like I did for extra grip.
