Articulated Egyptian Scarab - Print in Place Flexi Beetle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-in-place articulated Egyptian scarab: wiggles off the bed, no supports, 2-colour, desk size + keychain.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Print-in-place articulated sacred scarab (Khepri) pushing the sun disc - an original Egyptian beetle designed in Alexandria. Five gold body segments (head with sun disc, pronotum, wing cases, two abdomen plates) are linked by four captive pivot joints hidden inside the body, so it comes off the bed already assembled and wiggles side to side (about +/-10 degrees per joint). Wing cases carry a central seam and lapis-blue striae inlays; the raised sun disc between the toothed forelegs is lapis blue.
Desk size: 98 x 141.5 x 14.5 mm, about 28 g. Keychain version included (scale 0.5, about 49 x 75 mm with a key ring loop, about 5 g).
Print settings: 0.2 mm layers (0.12-0.16 for the keychain), 15% infill, 3 walls, NO supports, no brim needed (bottom edges are chamfered), PLA or silk PLA. Joint clearance 0.3 mm - print the first layer slightly hot and avoid elephant's foot; flex each segment gently after printing to free the joints. Colours: gold/bronze silk PLA body + lapis-blue sun disc and wing inlays (2-colour 3MF included, AMS/MMU ready; single colour works too).
Files: gold STL, lapis STL, combined 2-colour 3MF (desk + keychain), parametric CadQuery source (.py).
The images are 3D renders.
