Articulated Dragon – 70 cm, One Piece, Wiggles Like a Snake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 70 cm dragon that prints in one piece: 28 linked parts, joints print in place, no supports, no assembly.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print it once, take it off the bed, and it wiggles. This dragon comes off the printer in one piece: a horned head, 26 linked body segments with back spikes, two pairs of clawed legs and a spade-tipped tail. Every joint prints in place. No supports, no assembly, no glue.
On the bed it is a compact spiral of 229 x 203 mm. Stretched out it is about 70 cm of dragon, long enough to drape over both arms.
What it does
- Curls up, snakes across the table, hangs from your hand.
- 28 linked parts with hourglass pin joints in closed rings, designed for about ±50° sideways per joint.
- Designed with overhangs of 45° or less, and it printed without supports.
- Joint clearance in the model: 0.63 mm radial, 0.69 mm vertical, smallest gap 0.45 mm.
Printing
- Printed on a Bambu Lab X1 Carbon: 0.4 mm nozzle, 0.20 mm layers, matte white PLA, textured PEI plate, 2 walls, 15 % grid infill, brim auto, no supports. Slicer estimate 4 h 02 min, 117 g.
- Footprint 229.2 x 203.1 mm plus a little room for the brim. Printed on a 256 x 256 mm bed; too large for 180 x 180 mm beds.
- The 3MF is the project of that print. Check printer, material and plate settings for your machine.
- Printed once at this size. Scaling it down also makes the joint gaps smaller.
- Once it has cooled, work each joint gently. If one feels stuck, wiggle it loose instead of forcing it.
Safety
Not for children under 3: small parts and pointed spikes.
Files
- Articulated_Dragon_Print_in_Place.stl (print orientation, 28 linked bodies that print as one chain)
- Articulated_Dragon_X1C_PLA.3mf (project with print profile)
- Articulated_Dragon_Drawing.pdf (dimensions)
License
CC BY-NC-SA 4.0, Bertlab: https://creativecommons.org/licenses/by-nc-sa/4.0/ (covers all files and images of this upload).
Kurz auf Deutsch: Einmal drucken, vom Bett nehmen, und er schlängelt sich. Drache in einem Stück, 28 Glieder mit Gelenken, ohne Stützen und ohne Zusammenbau. Auf dem Druckbett eine Spirale von 229 x 203 mm, gestreckt rund 70 cm lang. Gedruckt auf einem Bambu Lab X1 Carbon mit 0,4-mm-Düse, 0,20 mm Schichthöhe, mattem weißem PLA, 2 Wänden, 15 % Füllung, Brim automatisch, ohne Stützen; laut Slicer 4 h 02 min und 117 g. Nicht für Kinder unter 3 Jahren: Kleinteile und spitze Zacken. Lizenz CC BY-NC-SA 4.0.