1 / 5
Bentley / Rolls-Royce Bakelite Fuse Holder Carrier (RD3686AU / 2703 Replacement) — zdjęcie 1
1 / 5

Bentley / Rolls-Royce Bakelite Fuse Holder Carrier (RD3686AU / 2703 Replacement)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement fuse holder body / carrier for classic Bentley Rolls-Royce. Replaces brittle original Bakelite parts.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Overview

This model is a replacement body for the original Bakelite fuse holder/carrier (Part No. RD3686AU, stamped with 2703) used in classic British luxury cars from 1946 to 1955.

The original Bakelite parts often become brittle over time and snap, leading to electrical failures. This 3D printable replacement lets you restore your fuse box using the original metal contacts or custom copper strips.

Compatible Models (1946–1955)
  • Bentley Mark VI (MKVI)

  • Bentley R-Type

  • Rolls-Royce Silver Dawn

  • Rolls-Royce Silver Wraith

Print Settings & Recommendations
  • Material: PETG, ABS, ASA, or Nylon/PA.

  • Do NOT use standard PLA due to low heat deflection temperatures inside motor compartments / fuse boxes.

  • Infill: 100% (Solid) for maximum strength and mechanical durability.

  • Layer Height: 0.15 mm or 0.20 mm.

  • Supports: Recommended depending on orientation.

Assembly Instructions
  1. Carefully remove the copper/brass spring contact clips from your original broken Bakelite unit
    (or form new copper sheet metal clips if original ones are damaged).

  2. Fit the metal contacts onto the 3D-printed body.

  3. Insert the fuse and reinstall into the fuse block.

⚠ DISCLAIMER & SAFETY NOTE:

This part is intended for automotive electrical systems. Ensure you use heat-resistant and flame-retardant materials (such as ASA, PETG, or Nylon) appropriate for your electrical load. Always double-check fitment and electrical insulation prior to installation.