1 / 2
Adjustable Playpen Wall Holder — zdjęcie 1
1 / 2

Adjustable Playpen Wall Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adjustable wall holder for securing a playpen or rail using a strong M36×2 printed screw and nut.

Ocena
5 / 5
Polubienia
1
Pobrania
1
Wydruki
1
Wyświetlenia
14
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple and practical wall-mounted holder designed to keep a playpen, wooden rail or similar bar securely positioned next to a wall.

I originally designed this holder for my own playpen setup, but the same principle can also be useful for other rails, bars or similar structures that need to be held securely in place.

The holder consists of only a few simple printable parts and uses a large printed screw and nut for adjustment.

Features

  • Wall-mounted design

  • Adjustable clamping system

  • Large printable screw and nut

  • Strong and simple construction

  • Easy to print

  • No complicated hardware required

  • Suitable for playpens, wooden rails and similar applications

  • Multiple holder versions included

The holder can be mounted to the wall with standard screws.

The large printed screw allows the rail or playpen frame to be held securely while still making the system easy to remove or adjust when needed.

Printed Screw

The design uses a large M36 × 2 printed thread.

Both the screw and nut are included as printable parts.

The large thread was chosen because it is easy to print, strong and convenient to tighten by hand.

Printing

The supplied 3MF files contain the recommended print orientation and settings used for my test prints.

For functional parts like this, I recommend using enough perimeters to give the holder good mechanical strength.

Recommended materials:

  • PETG – recommended

  • PLA – suitable for normal indoor use

  • ASA/ABS – also suitable if higher temperature resistance is required

Real-World Tested

The photos show the actual printed holder installed and used to secure the playpen next to the wall.

This is not only a concept or render – the design has been printed and tested in real use.

Custom Size

If your rail, playpen or mounting situation has different dimensions, leave the required measurements in the comments.

I can adjust the holder dimensions for a different setup.

The design is intentionally simple, so creating additional sizes is easy.


Simple, strong and functional – exactly what a practical 3D printed part should be.

Tagi