Modular A4 Honeycomb Paper Tray | Fits 250×220mm Print Beds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular A4 honeycomb paper tray for 250×220mm print beds. 3 heights, flat-printable, no supports, HSW connectors.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Modular A4 Honeycomb Paper Tray
A modular A4 paper tray inspired by the Honeycomb Storage Wall (HSW) system.
Designed to be printed flat, without supports, and assembled using HSW connectors.
Features
3 versions: 1, 2, or 3 rows of hexagons
Matching honeycomb sides and back
Fully open front for easy paper access
Modular, interlocking design
Fits a 250 × 220 mm print bed
No supports required
Printing Settings
Material: PLA or PETG
Layer height: 0.20 mm
Perimeters: 3
Infill: 10–15%
Supports: None
Assembly
Print the seven flat panels and assemble them using the included HSW connectors and tab-and-slot joints. For easier assembly, start by connecting the back panel to the two rear side panels. Then attach the remaining panels.
A connector fit-test model is included.
Credits
Inspired by the Honeycomb Storage Wall system by RostaP.