1 / 1
X Linear Rail Carriage with Aliexpress Drag Chain 20x10 R18 Attachment — zdjęcie 1

X Linear Rail Carriage with Aliexpress Drag Chain 20x10 R18 Attachment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

X Linear Rail Carriage with Aliexpress Drag Chain 20x10 R18 Attachment

Ocena
0 / 5
Polubienia
2
Pobrania
30
Wydruki
0
Wyświetlenia
582
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is for upgrading X axis of ender 6 to linear rail using 350mm MGN12H.

The model can be found at:
https://www.tinkercad.com/things/4ijoS2pBTCC


Remixed:
https://www.thingiverse.com/thing:4800961

I have remixed the above mentioned model to attach the drag chain of 20x10 R18 which you can easily purchase from AliExpress. The drag chain attachment part has an open end and small holes either side for cable tie locking.

I have used PETG, but ABS or ASA should be OK.

I recommend high infill ratio for rigidity. I have used 50%.

PLA or PLA+ is recommended only if you use the printer without the top cover.

Tagi