1 / 5
FREE Crab Spinner Pencil Topper, No Supports — zdjęcie 1
1 / 5

FREE Crab Spinner Pencil Topper, No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Free crab pencil topper with wiggly flexi claws and legs that spins 360 on a pencil.

Ocena
0 / 5
Polubienia
8
Pobrania
15
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

FREE download! A happy red crab with googly eyes on little stalks, a big smile, cream shell spots and 8 wiggly print-in-place flexi limbs: 2 big pincer claws with cream tips and 6 walking legs. Push it onto a standard pencil and it spins a full 360 degrees on a built-in spinner, and the claws and legs swing out when you flick it. It prints in one go with no supports and no assembly.

Size: 107 x 95 x 32 mm as printed (about 69 mm tall hanging on a pencil). About 18 g of filament plus purge. Print at 100% scale, because scaling changes the joint gaps and the pencil fit.

After printing, pick off any strings, then gently bend every joint up and down a few times until it swings freely. Give the spinner in the bottom a little turn, then push the unsharpened end of a pencil in, hold it upright and flick it.

❌ Selling prints: not allowed – but with the right license, it can be! Selling rights come with All Access on Patreon.

🔓 Join my Patreon Wild & Wiggly and unlock EXCLUSIVE 3D models – with new designs every week to boost your shop or project. Join here: https://www.patreon.com/cw/Wildandwiggly

As a member, you’ll get:

🔹 Commercial license to legally sell your prints

🔹 STL files for full customization

🔹 Optimized print settings for Anycubic

🔹 Professional product image sets to showcase your prints

🔹 Exclusive prints for members only

🔹 Voting on future designs

🔗 Print & start creating today Follow along and join here: https://www.patreon.com/cw/Wildandwiggly

Print time: about 3 hours plus color changes. To cut purge, print the pincer tips red.

Tagi