FREE Dragon Spinner Pencil Topper, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Free baby dragon pencil topper with wiggly flexi legs and tail that spins 360 on a pencil.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
FREE download! A cute teal baby dragon with big eyes, tiny fangs, white horns, yellow back spikes, a yellow belly, two little wings and 5 wiggly print-in-place flexi limbs: 4 short legs with white claws and a long tail with a yellow spade. Push it onto a standard pencil and it spins a full 360 degrees on a built-in spinner, and the legs and tail swing out when you flick it. It prints in one go with no supports and no assembly.
Size: 76 x 102 x 34 mm as printed (about 81 mm tall hanging on a pencil). About 16 g of filament plus purge. Print at 100% scale, because scaling changes the joint gaps and the pencil fit.
After printing, pick off any strings, then gently bend every joint up and down a few times until it swings freely. Give the spinner in the bottom a little turn, then push the unsharpened end of a pencil in, hold it upright and flick it.
❌ Selling prints: not allowed – but with the right license, it can be! Selling rights come with All Access on Patreon.
🔓 Join my Patreon Wild & Wiggly and unlock EXCLUSIVE 3D models – with new designs every week to boost your shop or project. Join here: https://www.patreon.com/cw/Wildandwiggly
As a member, you’ll get:
🔹 Commercial license to legally sell your prints
🔹 STL files for full customization
🔹 Optimized print settings for Anycubic
🔹 Professional product image sets to showcase your prints
🔹 Exclusive prints for members only
🔹 Voting on future designs
🔗 Print & start creating today Follow along and join here: https://www.patreon.com/cw/Wildandwiggly
Print time: about 2 hours 40 minutes plus color changes. To cut purge, print the white claw dots and the tail spade teal.