1 / 5
FREE Acorn Spinner Pencil Topper, No Supports — zdjęcie 1
1 / 5

FREE Acorn Spinner Pencil Topper, No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Free chubby smiling acorn pencil topper with a scaly cap that spins 360 on a pencil.

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

FREE download! A chubby, smiling acorn: a tan nut with faint grain lines, big black eyes with little highlights, a smile and pink cheeks, topped with a dark brown cap covered in cross-hatched scales and a short curved stem. Push it onto a standard pencil and it spins a full 360 degrees on a built-in captive spinner, the same print-in-place spinner as our football and baseball toppers. It prints in one go with no supports and no assembly.

Size: 33 x 33 x 38 mm. About 11.0 g of filament plus purge for the color changes. Print at 100% scale, because scaling changes the pencil fit and the spinner gap.

After printing, give the spinner in the bottom a little turn so it moves freely, then push the unsharpened end of a standard pencil in and spin it.

Part of the free Wild & Wiggly Thanksgiving set

The turkey, pilgrim hat and pumpkin pie slice spinner pencil toppers are free too. Grab all four for your Thanksgiving table.

❌ Selling prints: not allowed – but with the right license, it can be! Selling rights come with All Access on Patreon.

🔓 Join my Patreon Wild & Wiggly and unlock EXCLUSIVE 3D models – with new designs every week to boost your shop or project. Join here: https://www.patreon.com/cw/Wildandwiggly

As a member, you’ll get:

🔹 Commercial license to legally sell your prints

🔹 STL files for full customization

🔹 Optimized print settings for Anycubic

🔹 Professional product image sets to showcase your prints

🔹 Exclusive prints for members only

🔹 Voting on future designs

🔗 Print & start creating today Follow along and join here: https://www.patreon.com/cw/Wildandwiggly

Print time: about 5.5 hours (Anycubic Slicer Next estimate, normal mode, including color changes)

Tagi