FREE Pilgrim Hat Spinner Pencil Topper No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Free smiling pilgrim hat pencil topper with a gold buckle that spins 360 on a pencil.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial
FREE download! A classic black pilgrim hat with a happy face: a tapered, flat-topped crown and a wide brim with a soft felt texture and stitch lines, a ribbed brown band, a raised gold buckle, and big white eyes and a white smile on the crown. Push it onto a standard pencil and it spins a full 360 degrees on a built-in captive spinner, the same print-in-place spinner as our football and baseball toppers. It prints in one go with no supports and no assembly.
Size: 45 x 45 x 31 mm. About 11.0 g of filament plus purge for the color changes. Print at 100% scale, because scaling changes the pencil fit and the spinner gap.
After printing, give the spinner in the bottom a little turn so it moves freely, then push the unsharpened end of a standard pencil in and spin it.
Part of the free Wild & Wiggly Thanksgiving set
The turkey, pumpkin pie slice and acorn spinner pencil toppers are free too. Grab all four for your Thanksgiving table.
❌ Selling prints: not allowed – but with the right license, it can be! Selling rights come with All Access on Patreon.
🔓 Join my Patreon Wild & Wiggly and unlock EXCLUSIVE 3D models – with new designs every week to boost your shop or project. Join here: https://www.patreon.com/cw/Wildandwiggly
As a member, you’ll get:
🔹 Commercial license to legally sell your prints
🔹 STL files for full customization
🔹 Optimized print settings for Anycubic
🔹 Professional product image sets to showcase your prints
🔹 Exclusive prints for members only
🔹 Voting on future designs
🔗 Print & start creating today Follow along and join here: https://www.patreon.com/cw/Wildandwiggly
Print time: about 10 hours (Anycubic Slicer Next estimate, normal mode, including color changes)