Square D - QO Filler Plate w/Spring - QOFP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filler plate for Square D QO breaker panel.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary:
This is a filler plate for a blank breaker space in a Schneider Electric Square D QO breaker panel. I was unhappy with the factory QOFP units which were very difficult to remove and even when you did, it was a significant risk for injury on the sharp metal of the breaker box.
This revised unit has a print-in-place integrated spring that allows easy removal from the front and puts enough pressure to hold firmly when removing the panel. Insert towards arrow.
Print Settings:
Quality: 0.2mm
Infill: Any %
Supports: None
Orientation: Flat
Material Recommendations: ABS or ASA
Tested Materials:
Polymaker ASA (Pictured) - Recommended
Notes:
STEP & STL are actual size, scale print to handle material shrinkage rates.
Do not use metal tools when installing or removing.
Terms & Conditions:
This model is intended for use by homeowners and is free to use for that purpose.
Commercial production and/or sale not permitted, license for production available upon request.