3D Sets Doc Doppler eyes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eyes for Doc Doppler car from 3D Sets
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Doc Doppler: windscreen eyes for the 3D Sets Doppler and Doppler Eliminator
Give your Doppler a face! These are “glass” replacement windscreen glass and seals with cartoon eyes, printed flat with color swaps. Not multicolor print!
5 expressions
How to install
It replaces Windscreen Seal – left/right and Windscreen Glass. Windscreen Frame inner – left/right holds it in place.
How it prints
0.1 mm layers (already set in the file).
It starts in white and changes colour at these heights:
0.5 mm: shadow (grey or cream)
0.7 mm: iris (any colour)
0.9 mm: black outline
1.0 mm: eyelid (car colour)
The file also pauses at 0.6 mm.
5 slots (or manual swaps)
Load one colour per slot. When it pauses at 0.6 mm, just resume.
4 slots
White and the eyelid colour share slot 1, because white is only needed at the start.
Load slot 1 white, slot 2 shadow, slot 3 iris, slot 4 black.
At the 0.6 mm pause, take out the white spool, put the eyelid colour in slot 1 and resume.
Don’t skip the pause, or the eyelids will print white.