Tear-Open Christmas Gift Box – Print a Gift Inside
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print a real gift inside a Christmas box: one pause, no supports, tear it open with your thumbs.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Seal a real gift inside a 3D-printed Christmas box. You print the bottom, pause, drop the gift in, and the printer closes the lid over it. The recipient tears it open with their thumbs.
HOW IT WORKS
- One print, one pause, no supports.
- During the pause you drop in the gift and a small insert plate. The plate rests on a ledge and the ceiling prints right onto it, so there is no long bridge over your gift.
- The lid sits on a 0.5 mm ridge with a one-layer (0.2 mm) gap, held by up to 8 tiny bridges. Push it up with your thumbs and it snaps off cleanly.
SIZES
- S: gift up to 50 × 50 × 30 mm, box approx. 61 × 61 × 51 mm
- L: gift up to 70 × 70 × 50 mm, box approx. 81 × 81 × 74 mm
FILES
- gift_box_S/L.stl
- insert_plate_S/L.stl – print this before the box
PRINT SETTINGS
- PLA, 0.2 mm layers, 15 % infill, Arachne perimeters
- Supports OFF (if PrusaSlicer warns about a floating part on the light version, ignore it)
- Thick bridges ON and Detect bridging perimeters ON – the first lid layer has to sit on the ridge
STEP BY STEP
1. Print the insert plate (and the test rings).
2. Slice the box. In the preview, the seam layer (24.8 mm for S, 38.6 mm for L) should show only tiny dots and the ribbon ends.
3. Add a pause: drag the layer slider to 36.40 mm/layer 182 (S) or 56.20 mm/layer 281 (L), right-click the orange "+" and choose the pause print (M601) option. With 0.15 mm layers use 36.35 / 56.15 mm.
4. When the printer pauses, put the gift in (wrap it in paper so it doesn't rattle), lay the plate on the ledge and resume.
5. The gift has to handle about 50–60 °C from the heated bed, so no chocolate or candles.
COLORS
Single-extruder printers: add a color change (M600) at 38.00 mm (S) or 57.80 mm (L) and the bow and top ribbon come out in the second color. The gold ribbons on the sides (as in the pictures) need a multi-material printer (MMU, AMS) or a bit of paint.
OPENING
Push the lid up with your thumbs or twist it. Don't pull on the bow.
Images are renders of the model.