1 / 5
HP Photosmart M737 Wrist Strap Eyelet Hole Ring — zdjęcie 1
1 / 5

HP Photosmart M737 Wrist Strap Eyelet Hole Ring

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement/add on eyelet for the HP Photosmart M737 Camera

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
7
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

My HP Photosmart M737 camera's wrist strap eyelet broke so I designed a 3D-printable replacement. You'll need some longer screws to fit this replacement. I used 5mm long plastic screws. 

Recommended Print Settings:

  • ASA or heat resistant material

  • 0.1mm Layer Height

  • 4 walls

  • 100% Infill

  • No Supports

Installation Instructions:

  1. Unscrew the four case screws. 

  2. Align the replacement part and screw it down with the longer screws

Tagi