Modular 2-Tier Spice Rack Riser – Press-Fit Modules, Any Length, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two-step spice jar riser (Ø45–55) made of 60 or 90 mm modules that press together on pegs. Prints on its side.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Standard Digital File License
A two-step riser for spice jars in your kitchen cabinet or pantry – the back row sits higher, so you can read every label without moving the front jars.
Modular, any length: each module is 60 mm (or 90 mm) wide. Three smooth pegs on one side press into three sockets on the other side of the next module – print as many as your cabinet is wide and push them together. No glue, no screws.
For jars Ø45–55 mm: each step is 58 mm deep, with a 3 mm lip on the front edge so jars do not slide off.
Heights: lower step 20 mm, upper step 48 mm above the shelf (28 mm rise). Overall depth 120 mm – fits a standard 30 cm wall cabinet with room for a front row on the shelf itself.
Prints without supports: the whole profile lies on its side, so every wall is vertical in the print and the pegs grow straight up. The sockets have a 45° pointed top – no bridges.
Open underneath, 2 mm walls – light, stiff and quick to print.
Fit: pegs Ø5.0, sockets Ø5.3. If the fit is too loose on your printer, a drop of glue fixes it; too tight – lightly sand the peg chamfer.
Print settings
Orientation: on its side, as in the 3MF / STL (the module width is the print height, pegs pointing up).
0.20 mm layer, PLA or PETG, 2 walls, 15% infill, no supports.
Bambu Lab A1, PLA, 0.20 mm: 60 mm module – 1 h 08 min / 35.4 g, 90 mm module – 1 h 28 min / 51.9 g.
Designed from scratch by bezbajzlu.