1 / 5
Rune Wizard with Crystal Staff – 150 mm Fantasy Figure — zdjęcie 1
1 / 5

Rune Wizard with Crystal Staff – 150 mm Fantasy Figure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Old wizard casting a spell, with rune-embroidered robe, crystal staff and rocky base. 150 mm, one part, resin-tested.

Ocena
0 / 5
Polubienia
14
Pobrania
31
Wydruki
0
Wyświetlenia
121
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

An old wizard casting a spell: wind-swept cloak, rune-embroidered robe, braided beard, spell book on his belt and a carved staff topped with a crystal. He stands on a round rocky base with engraved runes.

Height: 150 mm (base 138 x 94 mm). Single solid part, no assembly. Checked for printing: watertight, manifold, one body.

This model was created with AI assistance (Meshy) and then cleaned up and prepared for printing by me.

Printing: test-printed in resin (MSLA) at 150 mm, see photo.

Resin: hollow the model and add drain holes to save resin (printed solid it needs about 280 ml). Tilt it slightly and place supports under the cloak, the raised hand and the staff crystal.

FDM (not test-printed): 0.12 mm layers, tree supports everywhere, 3 walls, 10-15 % infill. Remove supports from the raised fingers and the staff carefully, they are the thinnest parts.

Tagi