Japandi Ribbed Globe 4-Leg Base Table Lamp Vase Mode

This modern table lamp features a spherical ribbed lampshade set on a sturdy four-leg base for a clean minimalist and Japandi aesthetic. The spherical shade is built specifically to print in seamless vase mode, keeping print time short and material use low while diffusing soft, ambient light evenly. Every part prints completely support-free, allowing for an optional fuzzy skin texture on the pedestal legs to create a nice tactile contrast. It is scaled for standard E27/E26 or E14 with the included adapter cord sets and fits popular LED hardware perfectly. 

Get a commercial license to sell physical prints and access premium lamp files on my Patreon. If you enjoy my free designs and want to support my work so I can create more, you can do that there as well.  

PRINTING & ASSEMBLY
• Print-ready and tested.
• Support-free design.
• Fits standard E26/E27 sockets (hole diameter 41 mm; can be used as a replacement shade for most home table or pendant lamps) and standard E14 socket with adapter (included in files; hole diameter: 28 mm).
• Supports printing with PLA, PETG and other standard filaments.
• Assembles easily without glue or screws.

MODULAR SYSTEM
Mix and match filament colors, or pair this model with other interchangeable bases and shades from the AIR or UNI series available in my profile. AIR shades fit AIR bases directly, and they also fit UNI bases or  most home lamps using the included adapter (UNI shades do not fit AIR bases). Follow my page for regular modular design updates. 

DIMENSIONS
• Shade: height: 146 mm (5.7 in), width: 201 mm (7.9 in)
• Base: height: 148 mm (5.8 in), width: 143 mm (5.6 in)

PRINT TIME
Depends on printer and print settings. For standard settings on a Bambu Lab A1:
• Shade: ~1h 55m
• Base: ~4h 50m

WEIGHT
• Depends on printing settings. Using the recommended settings: shade ~70 g, base ~125 g.

WHAT'S INCLUDED
• Files for Lamp Shade and Base:
• 3MF — 4 files (Shade + Base + E14 adapter + Shade adapter), pre-configured print settings for Bambu Lab A1 (sliced in Bambu Studio — just open and print).
• STL — 4 files (Shade + Base + E14 adapter + Shade adapter), print-ready (tested and verified on Ender 3 S1)
• OBJ — full lamp assembly (Shade + Base combined), for import into Blender, Cinema 4D, or any 3D software

PRINT SETTINGS (recommended):
• Shade: VASE MODE (spiralize outer contour), layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, Warning! - bottom layers 26.
• Base: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 3 outer walls (perimeters). (Warning! Do not apply fuzzy skin to the threaded parts of the base. You can also print the entire base without fuzzy skin).
• No supports needed.
• All STL, 3MF files are already oriented properly.
Use LED bulb ONLY!

A lamp cord with E26/E27 or E14 socket is required (not included). Search "plug in lamp cord kit E26" or "plug in lamp cord kit E14" on Amazon or your local hardware/lighting store.
•• For personal use ONLY. Resale of files or printed objects is not permitted.••

Any questions? Feel free to ask!
Visit my profile & follow for more designs — new models added regularly!