Orc Warlord with Cleaver – Fantasy Miniature (32 mm & 75 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A heavily armored orc warlord with a massive cleaver. Tabletop and display scale, one part, resin-ready.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
A heavily armored orc warlord with big tusks, spiked shoulder plates, a fur cape and a massive cleaver, with trophy skulls on his belt. A strong leader for an orc horde or a boss for your adventurers.
Included files: orc_warlord_32mm.stl (tabletop version, 40 mm tall) and orc_warlord_75mm.stl (display and painting version, 94 mm tall). Single solid part, no assembly needed. Checked for printing: watertight, manifold, one body.
This model was created with AI assistance (Meshy) and then cleaned up, scaled and prepared for printing by me. It is an original design and not based on any game or film license.
Printing: designed for resin (MSLA), not test-printed yet. Resin: 0.05 mm layers, tilt 30-45 degrees, light supports under the cleaver, the horns and the shoulder spikes. FDM: use the 75 mm version with 0.12 mm layers and tree supports. Note: in the 32 mm version the cleaver edge and some spikes are thinner than 0.8 mm, so print it in resin and handle it with care.