Anemona — Sculptural Case for Synaptics Coralboard SL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sculptural, passively ventilated enclosure for the Synaptics Coralboard SL, featuring an organic column-like structure
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Anemona — Sculptural Case for Synaptics Coralboard SL
A case that turns the Coralboard SL into a small sculpture: a field of rounded columns, like a sea anemone or a coral colony, grows over the board and doubles as its ventilation. Beneath the decorative structure, it remains a practical enclosure: the ports you need every day stay accessible, and the case can stand on a desk or be mounted on a wall. The case goes together without any metal fasteners.
Made for the Coralboard Cases & Mounts contest.
Please note: not tested on a real board
The case was designed using the official STEP reference model of the Coralboard SL, provided by the Coral Printables account. I don't own the board, so the fit has not been physically tested.
All dimensions are based on the reference CAD.
Although I've tried to account for all design details and potential fit issues, some discrepancies may still occur since the case has not been physically tested. If you encounter any problems or have suggestions for improvement, please share your feedback in the comments. I'll be happy to look into them and make adjustments where possible.
Features
Openings for USB-C (power/data), USB-A, microSD, USER and RESET buttons, Qwiic, I2S2, the battery connector and the CSI camera ribbon.
Passive ventilation through the gaps between the sculptural columns.
Two-part case (base + lid), with no screws required for assembly.
Four feet for desk use and two keyhole slots for wall mounting. Mount it with the USB edge facing down so the cables hang naturally.
The board is secured to the base by four slightly oversized snap-fit pins. The pins flex inward at their integrated slots as the board is pressed into place.

Versions — choose one option from each group
Base bottom
Open: maximum airflow; the underside of the board remains accessible.
Grille: a coral-pattern lattice protects the underside.
Lid
Closed: decorative lid; the top-side connectors are not accessible without removing it.
Port access: a cut-out exposes the top-side connectors (20-pin GPIO header, I3C, both mikroBUS sockets and the CSI connector).
Joining base and lid
Lid pins & slots: printed connections, no extra hardware.
Magnets: 5 × 2 mm neodymium disc magnets.
Feet
Print them in TPU 95A (press-fit), or use ready-made stick-on rubber feet ⌀8–10 mm.
The base and lid options are interchangeable within each joining system. However, the pin-and-slot and magnetic versions are not cross-compatible: make sure to choose matching base and lid versions.
Hardware (not included)
Board fixation: none required; four printed screws are included in the files. If a printed screw doesn't work for you, you can try an M3 × 5 mm screw in the same hole. I haven't tested this myself.
Lid pins & slots version: no additional hardware required.
Magnet version: 12 × neodymium disc magnets (5 × 2 mm), arranged in six pairs, and a drop of CA glue.
Feet: 4 × stick-on rubber feet (only if you don't print them in TPU).
Wall mounting (optional): 2 × screws, 3 mm in diameter and 20–25 mm long, with pan heads approximately ⌀6 mm. The keyhole slots are spaced 75 mm apart.
The Coralboard SL and cables.
Print notes
A Bambu Studio project file (3MF) with my print settings is included. The layer height in the project is 0.2 mm. If you prefer a smoother surface and don't mind a longer print, try 0.16 mm or 0.12 mm. The lower layer heights are especially helpful around the rounded tips of the columns, where layer steps are most visible.
Printed screws
Print the four board screws at a layer height of 0.08 mm. A fine layer height is what gives the small thread a clean profile. The joint was tested in print.
Important — do not repair the model
When opening the included Bambu Studio project, the slicer may flag two parts and suggest repairing them. This warning can be safely ignored. Do not use the repair function before slicing. Repairing these parts removes the internal cavities designed to hold the magnets.
Slice the model as provided, without repairing it.
Magnet version
The pockets in the base are designed to be covered by a thin layer of material. Pause the print at the layer where the pockets are open, insert the magnets (make sure to check their polarity), then resume printing so that a few more layers cover them.
In the included 3MF, the pause is set at Z = 27.6 mm for the 0.2 mm layer-height profile. If you change the layer height, adjust the pause to the corresponding layer where the magnet pockets are open.
On the lid side, the magnets are glued in flush with the surface.
Assembly
All connections are designed for a snug, gap-free fit. Depending on your printer's calibration and material, some parts may feel quite tight during assembly. Apply firm, even pressure and avoid forcing the parts if they don't align correctly.
Print the parts and press the TPU feet into the base (or attach stick-on rubber feet).
Place the board on the base, aligning its four corner holes with the snap-fit pins. Press it down evenly until all four pins engage.
Connect the battery now if you use one: pass its plug through the battery opening and plug it in inside the case before closing the lid; only the wires leave the enclosure.
Close the lid using the lid pins and slots or the magnets, depending on your chosen version.
For wall mounting, install two screws, place the larger openings of the keyhole slots over the screw heads, then slide the case down to secure it.
Good to know
The board does not have a built-in battery charger. Check the polarity before connecting a LiPo battery.
This is an unofficial community design. Coralboard, Coral and Synaptics are trademarks of their respective owners.