1 / 4
QIDI Plus 4 QIDI Box hub mount, mount in place of spool holder — zdjęcie 1
1 / 4

QIDI Plus 4 QIDI Box hub mount, mount in place of spool holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed these to allow placing the QIDI Box on the left side of the printer.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
1
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I made this for my QIDI Box hub to mount it to the original "fixing block" where the spool holder mounts. The supplied mount would have the tubes coming from the wrong side if the Box is on the left side of the printer.

The non-adjustable design should work with the original screws, it is sized to accept M3 screws threading into the holes. 

I made a second variant for adjustment forward & back to facilitate inserting/removing the tubing between the hub & printer. The slots are sized to clear M3 screws, intending for washers & nuts on the back side. This allows for loosely attaching the hub, insert the tube between the hub & printer then tighten to fix in that position.