22 Creedmoor Cartridge Insert for Milwaukee Packout (48-22-8435)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a TEST version of the 22 Creedmoor please print the corner piece first and verify that it will work for you!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
By request:
This is a new variant of my 6mm Creedmoor packout cartridge inset that I've previously made. This one is designed for the 22 Creedmoor. Overall, it's mostly the same. However, the bullets can be longer, so I've lengthen the space for the bullet itself as per SAAMI chamber head spacing spec I'm also including a corner piece to test print, so that someone with a 22 Creedmoor can test print it and tell me if I need to modify the cartridge hole. (I did oversize it .1mm - since the goal is to have the cartridge sit on the shoulder as to prevent the lid from smacking the bullet further into the case. Which is why the rounds sit nose down in this design...)
Note: To assemble the units into one single part (not required) the print uses 1/4in dowels / steel pins.