1 / 2
Rockerplate Banana XL - Front end adapter — zdjęcie 1
1 / 2

Rockerplate Banana XL - Front end adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Secures the front end of the Zwift ride to the Banana XL, since it slightly moves without.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution
  • printed with 40% gyroid infill

  • 6 Wall loops

  • no supports

Holds up well, seems to be sturdy enough to withstand the movement. 
I put a small piece of a no-slip mat under the print, so the PLA does not move at all. 

Secure with 2 zip-ties, maximum width is 9mm.

Tagi