1 / 6
Almaty TV Tower & Kok-Tobe Hill — 3D City Relief — zdjęcie 1
1 / 6

Almaty TV Tower & Kok-Tobe Hill — 3D City Relief

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Desk relief of Kok-Tobe hill in Almaty with its 372 m TV tower, from real elevation and map data.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
2
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A desk model of Kok-Tobe — the hill above Almaty — with its 372 m TV tower. The hill, its terraces, the roads, footpaths and buildings all come from open map and elevation data, so the shape is the real place, not a stylised skyline.

Highlights

  • A real place, from real data: elevation from the Copernicus DEM, with roads, paths and buildings from OpenStreetMap — at their true positions and heights.

  • The measured tower: the 372 m TV tower is traced from the original drawings — the stepped shaft, both pods and the antenna at their real heights.

  • Removable tower: it prints on its own and drops over a peg on the hill, so you can dial in the thin antenna on the tower alone (about 20 min) instead of reprinting the whole 2-hour terrain — and if it ever breaks, you just reprint the tower.

  • Two colours, no AMS: bone-white hill and tower, black frame — each part prints on its own plate and goes together after.

  • Fully parametric: change the size, the height of the hill or the tower, turn the frame or the buildings off — or point it at any coordinates to print another place.

Printing

Three plates, 0.2 mm layers, no supports needed. The relief is stepped into 0.4 mm contour terraces, so every step lands on a layer line.

  • Terrain — Bone White PLA, ~2 h, 59 g

  • Frame — black PLA, ~1 h, 46 g

  • Tower — Bone White PLA, ~20 min, 1 g

Add a drop of glue on the peg so the tower sits tight and doesn't wobble.

Files

The ready-to-print .3mf has all three plates with colours assigned. The per-part .stl files are for slicers that can't read the 3MF's colours. The .scad source (with terrain.scad) regenerates the model for any size or location.

Make it your own

The model is parametric. The OpenSCAD source and the script that pulls the map data are also on GitHub — regenerate it at any size, tweak the exaggeration of the hill or the tower, or point it at any coordinates to print your own city.

If you print one, post a make — I'd like to see it.

Tagi