1 / 3
Sony WH-1000XM5 Right Hinge with Locking Sleeve — zdjęcie 1
1 / 3

Sony WH-1000XM5 Right Hinge with Locking Sleeve

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Right hinge repair with a smooth locking sleeve, filament pin and two stopper-clearance options. PETG prototype.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
101
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
GNU General Public License v3.0

A replacement right-side Sony WH-1000XM5 hinge with a smooth outer sleeve that conceals the fastening mechanism. Based on FloTec09’s original replacement hinge.

The split socket closes around the existing metal shaft. A sleeve slides over it and turns approximately 30° to lock. A short piece of 1.75 mm filament serves as a removable locking pin.

The keeper provide clearance for the metal shaft’s projecting stopper:

  • Top recess: clearance extends 2 mm from the opening.

Print one body, one sleeve, your chosen keeper, and the curved earcup piece if needed. Printing both keepers lets you compare their fit. Use the matching parts supplied here.

Suggested starting settings: PETG, 0.4 mm nozzle, 0.16 mm layers, five walls, 100% infill, and 100% scale. Inspect orientation and supports before printing, keeping mating surfaces and internal channels clean.

Assembly:

  1. Position the sleeve out of the way; cable disconnection may be needed.

  2. Close the body and keeper around the shaft, placing the stopper toward the relieved area.

  3. Slide the sleeve down and turn it 30° clockwise when viewed from the opening.

  4. Insert the filament pin: approximately 2.8 mm long for A or 3.3 mm for B. Check seating before final trimming.

The body-to-earcup-piece joint requires adhesive, as in the original design.