Intex 10574 Joint Pin for connecting frame parts on above-ground pools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part was designed as an OEM-look replacement joint pin designed to secure corner joints and frame pieces on small I
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This part was designed as an OEM-look replacement joint pin designed to secure corner joints and frame pieces on small INTEX rectangular above-ground metal frame pools.
The pin measures 2 1/4" (67mm) end-to-end with a barrel diameter of 11/32" (8.75mm). In the image, the 3D printed replica is shown on top.
It is designed to fit the following pools (see the INTEX web site for the complete list of compatible pools:
• 86-5/8" x 59" x 23-5/8" (220cm x 150cm x 60cm)
• 102-1/2" x 63" x 25-5/8" (260cm x 160cm x 65cm)
• 118" x 78-3/4" x 25-5/8" (300cm x 200cm x 65cm)
• 118" x 78-3/4" x 29-1/2" (300cm x 200cm x 75cm)
• Others?
I recommend printing at a 30 degree angle, enable tree supports, use a 50% or greater infill, 0.4mm nozzle, and a 0.08mm layer height for a clean print. I used PCTG filament for its elasticity and outdoor durability.
https://intexcorp.com/replacement-parts/10574-pins-for-small-rectangular-frame-pools/