Milwaukee Shockwave Bit Case Corner Adapters (+4 Extra Bits) | Fits 4932 4642 40
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Milwaukee Shockwave Bit Case Corner Adapters (+4 Extra Bits)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
# Milwaukee Shockwave Corner Bit Adapters (+4 Bits)
Adds 4 additional standard 1/4" (25mm) hex bits into the unused front corners of your Milwaukee Shockwave case.
### 🔍 Compatibility
- Milwaukee Shockwave 32pc Bit Set (Part No. 4932 4642 40)
- Fits any Milwaukee case sharing the same lower corner shell geometry.
### 💡 Features & Quantity
- Print 2x of the same file: The design is universal and fits both the left and right corners directly.
- Friction Fit: Internal retention tabs hold bits securely in place.
- Lid Closes Flush: Zero clearance issues with the clear cover.
### ⚙ Important Print & Slicer Settings
- Wall Thickness Note: Designed with 0.425 mm walls. Set your slicer's extrusion / line width to 0.40 mm (or enable the Arachne engine) to ensure solid, gap-free perimeter walls.
- **Layer Height:** 0.12 mm – 0.16 mm (smaller layer heights ensure crisp retention tabs).
- **Material:** PETG (recommended) or PLA / ABS.
- **Supports:** None (prints flat on the bottom face).
### 📁 Files
- 1x Universal Corner Adapter .3mf and .stl) — Print 2 copies
---
Leave a *Like** or post a Make if you find this useful!*