Simplified case for SainSmart 7" Touch Screen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the 800×480 7 inch touch screen from SainSmart. The original from MiguelBi had hexagon grids both in the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A case for the 800×480 7 inch touch screen from SainSmart.
The original from MiguelBi had hexagon grids both in the back layer and in the middle layer, making it very difficult to print (everything should go perfect).
I simplified those layers by adding 1.5 mm boxes, effectively making both layers flat, by filling out the hexagon grids.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Filament: Prusament PETG Orange
Notes:
I added supports in the back cover (layer C), to avoid bridging. They came out very easily (probably because of PETG filament).
Category: DIY