1 / 1
Corner Bracket for HiMill D1(S) — zdjęcie 1

Corner Bracket for HiMill D1(S)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Corner bracket/square for the HiMill D1 series desktop CNCs

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A bracket to replace the original metal one, as that, in my case, was a bit pinched, and also more than a bit difficult to get exactly square with the X/Y axes.

This model has wings that nestle along the edges of the work platform, making placement highly repeatable. For the same reason, it should be mounted using button-head or socket-head M4s (flat underside of the head), not countersunk ones.

Two pieces are provided: The bracket itself, and a spacer/stage that lifts it off the spoilboard. The last is to be used when squaring the bracket, so you don't dig into the spoilboard. Print the bracket with an extra wall or two so that there is room for some squaring.

For squaring it, the attached NC file (.txt added as Printables do not support NC files) can be used with a 1/8" endmill, set zero at the bracket surfaces (use top-right option in MaxMakeLab for zeroing with the probe, Z zero on the top surface), then it will take off a tiny bit. Keep rezeroing and rerunning until the surfaces are processed in their full length and probing confirms that they are indeed square.

Tagi