1 / 4
Flexi Scorpio Keychain | Zodiac Sign | Print in Place — zdjęcie 1
1 / 4

Flexi Scorpio Keychain | Zodiac Sign | Print in Place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wiggly print-in-place scorpion keychain: claws up, and a four-part tail that curls to the stinger.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

It's Scorpio season (23 October to 21 November), so here's the Scorpion (♏), one of the first three of our twelve Western zodiac flexi keychains to go live.

It prints in one go: no supports, no assembly, no glue. Five parts, four joints: a body with two pincer claws and eight legs, the ♏ glyph on its back, the key-ring loop at its head, and a four-part tail that swings all the way to the stinger.

Size: 99 x 35 x 6 mm.

Test-printed on our Creality SPARKX i7: that's the print in every photo and video. A ready-made Creality Print project for the i7 is included next to the STL, plus an Anycubic Kobra X project set up the same way (not test-printed on the Kobra X yet).

Print settings:

  • PLA or PETG, 0.4 mm nozzle, 0.2 mm layers

  • No supports, no brim

  • Keep elephant-foot compensation on (about 0.1-0.15 mm) so the joints don't fuse to each other

  • After printing, flex each joint gently once to free it

Which material: PLA is fine for a keychain that mostly stays indoors. If it lives in your pocket or rides in a hot car, use PETG (PLA starts to soften around 55-60 °C).

The other nine signs are already off the printer. Follow Two Paws Workshop so you don't miss them.

Designed by us with AI help (the shapes are written as OpenSCAD code), then printed and tested for real: every photo and video here is the actual print.

Two Paws Workshop: two of us at the bench, making things that move.

Tagi