1 / 4
Flexi Virgo Keychain | Zodiac Sign | Print in Place — zdjęcie 1
1 / 4

Flexi Virgo Keychain | Zodiac Sign | Print in Place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wiggly print-in-place Virgo keychain: a smiling maiden with a swinging braid and a ribbon bow.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
2
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Meet Virgo (♍), the Maiden, one of the first three of our twelve Western zodiac flexi keychains to go live, and the sweetest of the lot.

It prints in one go: no supports, no assembly, no glue. Five parts, four joints: a smiling face with a flower in her hair and the key-ring loop on top, a braid of three lobes that swings, and a ribbon bow at the end carrying the ♍ glyph.

Size: 107 x 44 x 6 mm.

Test-printed on our Creality SPARKX i7: that's the print in every photo and video. A ready-made Creality Print project for the i7 is included next to the STL, plus an Anycubic Kobra X project set up the same way (not test-printed on the Kobra X yet).

Print settings:

  • PLA or PETG, 0.4 mm nozzle, 0.2 mm layers

  • No supports, no brim

  • Keep elephant-foot compensation on (about 0.1-0.15 mm) so the joints don't fuse to each other

  • After printing, flex each joint gently once to free it

Which material: PLA is fine for a keychain that mostly stays indoors. If it lives in your pocket or rides in a hot car, use PETG (PLA starts to soften around 55-60 °C).

The other nine signs are already off the printer. Follow Two Paws Workshop so you don't miss them.

Designed by us with AI help (the shapes are written as OpenSCAD code), then printed and tested for real: every photo and video here is the actual print.

Two Paws Workshop: two of us at the bench, making things that move.

Tagi