Flexi Sagittarius Keychain | Zodiac Sign | Print in Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wiggly print-in-place Sagittarius arrow keychain that hangs point up and whips when you flick it.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
Sagittarius season starts on 22 November, so here's the Archer's arrow (♐), one of the first three of our twelve Western zodiac flexi keychains to go live.
It prints in one go: no supports, no assembly, no glue. Four parts, three joints: an arrowhead with the ♐ glyph and the key-ring loop at its tip, two shaft segments and the fletching, so it hangs point up and wiggles like a whip.
Size: 104 x 28 x 6 mm.
Test-printed on our Creality SPARKX i7: that's the print in every photo and video. A ready-made Creality Print project for the i7 is included next to the STL, plus an Anycubic Kobra X project set up the same way (not test-printed on the Kobra X yet).
Print settings:
PLA or PETG, 0.4 mm nozzle, 0.2 mm layers
No supports, no brim
Keep elephant-foot compensation on (about 0.1-0.15 mm) so the joints don't fuse to each other
After printing, flex each joint gently once to free it
Which material: PLA is fine for a keychain that mostly stays indoors. If it lives in your pocket or rides in a hot car, use PETG (PLA starts to soften around 55-60 °C).
The other nine signs are already off the printer. Follow Two Paws Workshop so you don't miss them.
Designed by us with AI help (the shapes are written as OpenSCAD code), then printed and tested for real: every photo and video here is the actual print.
Two Paws Workshop: two of us at the bench, making things that move.