1 / 4
Milwaukee M18 brad nailer and Framing nailer wall mount remix — zdjęcie 1
1 / 4

Milwaukee M18 brad nailer and Framing nailer wall mount remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall mounts for the Milwaukee brad nailer and framing nailer that use 1/4" bolts to support the print.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

The original design was fantastic, but as I was using these in the tool room of the local high school, I wanted something a little more supported.  I used threaded inserts that I screwed into the plywood back, and then used 1/4" bolts through the design. If the printed part ever fails, the bolt should continue to support the tool. Thanks to Claude for the assist in redesigning the part.

Tagi