BKG Knob for Quansheng - Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix where the text&logo and knob are individual files, and reorients the text to be readable when off.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
First and foremost: Thank you Ara for the original design! It is wonderfully done!
To use: Using Orca slicer as the example:
Dragging both files into Orca, Orca will prompt if you want to import as a single object with multiple parts or not. Importing as a single object will bind the two in the correct orientation to where all that is needed is to select the filament to use for each part and then send it to the printer.

If the object looks really large, sometimes it comes in at the incorrect sizing:

Scale it by 40%, or until the values are:

This is what works best on my printer, Flashforge AD5X, but it might differ on yours. This is why I am leaving the file at a larger size to allow scaling down instead of up, I find it easier to scale down.
Do not be alarmed if the slicer makes the face/top of the knob look like it will print incorrectly:

Slice the plate and then look at the resulting layers:

With both parts on the bed the slicer will slice everything accordingly.
Slice and print!
I have found that a 0.25mm nozzle gives great text clarity and sharpness. YMMV
73's
