Modular Yugioh Tin Divider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize your cards inside the megatin (2019 and newer)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple insert that fits snugly inside the yugioh mega tins (starting with the 2019 gold sarcophagus).
Holds cards with small or large sleeves.
ASSEMBLY:
Print 2 Sides, 2 Ends, and up to 5 Dividers
To assemble it, you can easily put 2 Ends and one Side in... but to get the last Side in you have to flex both Sides toward the center of the tin. Once you get it to slip in, it will still bow in a little until you put atleast one Divider in...
To get the Dividers in, flex them a bit, and they will slide right in place.
I recommend PLA as its flexier than PETG.
I used 15% infill and 2 shells.
If you can't get it together, try printing the Sides at 98% width or something. I got it to work at 100%, it's a tight fit.