Fieldpiece VP633 Vacuum pump hose holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This tray can store the vacuum hose on top of the Fieldpiece VP633 vacuum pump. Warning: rather big model!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Standard Digital File License
This tray/organizer/whatever you would call it, is made to easily store the vacuum hose.
When storing the vacuum pump in my van from work, I always was having issues how and where to put the hose. I do not want to get it damaged, I don't want it to come out of the shelve, etc. When moving the pump from my van to the HVAC machine I'm working on, the hose also is a separate part to transport.
My solution is this model.
Printed in TPU. Curl the hose neatly into the ellipse shape. Put the tray on top of the vacuum pump. Also put the power cord into the tray. Then hose and power cord are stored. The grip of the vacuum pump is still accessible so carrying is still no problem.
When storing the entire thing, the hose and power cord stay in place, nicely protected.
Printed in TPU
0,6mm nozzle
0,32mm layer height
No supports needed
Printed at 45 degrees angle around Z-axis because otherwise it will not fit.