Ro-Ro Linkspan 1:350 - Hand-Crank Rack Hoist with Ferry Stern Ramp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Working hand-cranked Ro-Ro ferry linkspan, 1:350, 22 parts, no supports. Full 1:200 + 1:350 kit with 3MF on Cults3D.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
A hand-cranked, working model of a Ro-Ro ferry LINKSPAN in 1:350: a hinged through-truss span raised and lowered by a rack-and-pinion hoist on a lattice tower with a printed key crank and lock pin, plus a quay tray, vehicle ramp and a ferry stern section with a hinged stern ramp. Free sample = the 1:350 STL set (22 parts, 144 g, no supports, slice-checked in PrusaSlicer, 0.4 mm nozzle, 0.2 mm layers). Print the fit-test coupon first. The photos show the complete model; the multicolour 3MF files, the 1:200 scale, the printing and assembly guide and the exploded views come with the full kit on Cults3D: https://cults3d.com/en/3d-model/game/working-ro-ro-linkspan-with-ferry-stern-ramp-hand-crank-rack-hoist-1-200-1 . Honest notes: designed and slice-checked, not yet test-printed; real-world dimensions are assumptions; the span is held only by the lock pin (no ratchet), and at 1:350 the tower and gears are oversized because of the 1 mm gear module. Designed with AI assistance.
