1 / 6
PCTC Car Carrier 1:700 with Hand-Raised Stern Ramp (free sample) — zdjęcie 1
1 / 6

PCTC Car Carrier 1:700 with Hand-Raised Stern Ramp (free sample)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Generic 200 m car carrier, 1:700 (286 mm), no supports. Hinged stern ramp raises by hand. Free single-scale sample.

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

A generic pure car and truck carrier (PCTC, about 200 m x 32 m, 12-deck box hull with window rows) at 1:700 scale, 286 mm long, with a hinged stern ramp that you raise and lower by hand. No real ship, no brand names.

This is the free single-scale sample: hull sections, accommodation, bridge, funnel, the stern ramp with its pin, cradle stands, hull pins and a fit-test coupon. The photos show the COMPLETE model, including the starboard side ramp and the 1:400 version; the side ramp and the mast are not in this download.

Print notes: no supports; designed and slice-checked in PrusaSlicer, not yet test-printed. The hull prints in 2-3 sections that join with dowels.

Full set (1:400 + 1:700, full hull and waterline versions, stern and side ramps, multicolour 3MF): https://cults3d.com/en/3d-model/game/pctc-car-carrier-scale-model-with-stern-side-ramps-hull-waterline-1-400

Tagi