1 / 1
Dustpan handle repair — zdjęcie 1

Dustpan handle repair

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dustpan handle repair adapter to fix a broken grip and prevent waste – print instead of throwing away!

Ocena
0 / 5
Polubienia
2
Pobrania
2
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Heavy-duty design built for full loads and scraping stubborn dirt. Printed as a test object for PA12 material durability. Note: The old handle must be cut off from the dustpan, and you will need to drill holes into the blade for the adapter. Recommended drill bit size is ⌀4,2 to ⌀4,5 mm. After cutting off the old handle, make sure to flatten the ridge in the adapter area with e.g. a hammer.

Part list:
  • adapter 1 | quantity: 1

  • adapter 2 | quantity: 1

  • cylinder head screw e.g. ⌀4x15 | quantity: 5

  • cylinder head screw e.g. ⌀4x20 | quantity: 4

  • hexagon nuts M4 | quantity: 9

  • handle tube e.g. ⌀28x200  | quantity: 1 

Print instruction:
  • material: PETG or PA (Nylon)

  • supports: partly required

  • layer height: 0,25mm or 0,32mm

  • nozzle diameter: 0,4mm or 0,6mm

  • brim: not required

  • bed adhesion tip for Nylon: If you experience bed adhesion issues due to the high stress of warping, apply water-soluble Ponal Classic wood glue (diluted or as a thin film) directly onto the build plate to boost adhesion.

  • enclosure: recommended

Tagi