1 / 4
MOZA SGP Shifter 4080 Profile mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A MOZA SGP Shifter mount for 4080 Profile
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This shifter mount is for the MOZA Racing SGP shifter on a 4080 profile sim rig. It offers a sideways offset, which brings the SGP shifter closer to or farther from your seat.
It requires six M8 screws and T-nuts to mount it on your rig, plus two M8 screws and nuts to mount your SGP shifter on top of the mount.
The bottom of the mounting point is enhanced with support; however, there's still some play due to the slightly uneven/wobbly bottom of the SGP shifter itself (I think).
Turn it 180 degrees to use it on the right-hand side.
